Description
Evapo-Rust Super Safe Rust Remover product information
Small object de-rusting: Pre-clean item if it is oily. Rinse item and completely immerse item to be de-rusted for 1 to 12 hours depending on the depth and age of rust. Check progress periodically. Once rust is removed, rinse item with water.
For best results, soak for 24 hours.
Large object de-rusting: Pre-clean item if it is oily. Rinse item completely. Soak EVAPO-RUST® into smooth high-quality paper towels and cover the area to be de-rusted. Flatten the towels to remove air bubbles, and then cover the wet towels with plastic sheeting to prevent EVAPO-RUST® from drying. Use magnets to hold the towels and plastic in place if necessary. Allow the towels to remain wet on the surface for 12 to 24 hours depending on the depth and age of rust. Check progress periodically. Once rust is removed, rinse item with water.
Smaller fuel tank de-rusting: Completely fill the tank with EVAPO-RUST® and allow to sit for 2 to 4 hours. Drain completely and rinse well with water. Air dry and fill with fuel immediately to eliminate flash rust.
Larger fuel tank de-rusting: Pour in 5 Litres of EVAPO-RUST® and rotate fuel tank every hour until the rust has been removed. Drain completely and rinse well with water. Air dry and fill with fuel immediately to eliminate flash rust.
EVAPO-RUST® can be used over and over until performance drops off. EVAPO-RUST® is safe for use in spray cabinets, ultrasonic cleaners, pressure washers, pumps and vats. When ready to dispose of spent EVAPO-RUST®, only the iron content of the solution will dictate disposal method. In most cases, it can be safely put down the drain.
Caution: Keep out of reach of children. Rinse hands with water after use. In case of eye contact, rinse thoroughly with water. Rusty items with edges may become sharp once de-rusted. Handle with caution.
Watch the Evapo-Rust Application Videos
Reviews
There are no reviews yet.