DINITROL Metallic – Vehicle Underbody Corrosion Protection Information
The film is heat-resistant and maintains good adherence to substrates at all standard repair and paint oven temperatures.
DINITROL METALLIC is an underbody protection product which is used in vehicle construction and repair. Applied onto a dry and clean surface, it adheres well to lacquered substrates, as well as those treated with PVC or similar. Zinc, rubber and plastic surfaces are not attacked by the product. The product’s excellent application properties and high solid content guarantee clean and easy processing. DINITROL METALLIC is suitable for protecting untreated surfaces, machines, and iron and steel objects in highly corrosive environments. DINITROL METALLIC can be used for transport and storage protection in extreme conditions.
Method of Use:
Leave the aerosol at room temperature (16 − 20°C). Shake the can before use until the steel ball can clearly be heard. The surface must be dry and free from rust and grease. Spray at a distance of 20 − 30 cm. In order to achieve optimal corrosion protection, a wet film of 1 − 2 mm should be applied. Thicker layers can be applied in areas where a higher degree of protection is required against mechanical factors. Leave to dry at room temperature. In order to prevent any valve blockages, hold the can downwards after use and briefly spray pure gas.
- Base: Wax
- Colour: brown
- Density: 0,75 kg/m³
- Flash point: < - 20°C
- Flash point agent: 41°C
- Solid matter: 25%
- Propellant: Propane/butane
- Recommended film thickness wet: 1100 µ
- Recommended layer thickness: 300 − 500 µ
- Yield / aerosol: 1.0 − 1.5 m²
- Cold stability: -20°C
- Heat resistance: > 130°C
- Cleaning: Petroleum spirit
- Storage: cool and dry
- Storage time: 24 months