DINITROL 538 plus is a primer designed as a pre-treatment in replacing polyurethane direct-glazed automotive glass parts and other substrates. DINITROL 538 plus is a solvent containing, physically and chemical drying black primer which promotes the adhesion between the glass/paint surface and the direct glazing adhesive and acts as a UV protection. DINITROL 538 plus combines the following functions in one product:
- One-step glass-frit primer
- RIM and pinch weld primer
- Long life primer (no reaction within 3 month)
- Inhibits rust in small nicks and scratches
- Compatible with all DINOL adhesive systems
Before use of the primer DINITROL 538 plus, shake the bottle thoroughly until paint mixing balls rattle freely. Mix for an additional one minute. The application of the primer DINITROL 538 plus can be done manually by felt and/or an adequate tool.
Due to its reactivity with moisture, the primer has to be used within 1 week after the bottle has been opened. (if properly sealed) DINITROL 538 plus should not be used if the product has remained open for an extended amount of time. Replace inner seal and cap tightly and immediately after each use to ensure maximum shelf life.
Please note: This product is suitable for experienced professional users only.
- Material safety data sheet
- DINOL primer chart
Storage between 0 and 35°C, in closed packaging in a dry and ventilated area.