DINITROL 449 Underbody Protection Information
- Please note: This product is NOT overpaintable
- Waterbased, environmental friendly
- No VOC
- Good corrosion resistance
- Very good stone chip resistance
- Durable tough elastic film
- Compatible with DINITROL 977
- Colour changing from blue to black when drying
- Easy to verify when product is dry
DINITROL 449 is applied as anti-corrosion, underbody and stone chip protection on e.g. chassis, wheel-housings and side-skirts of cars, trucks and coaches in:
- Automotive industry
- Bus & coach construction
- Trailer construction
- Garages, workshops
- Body repair shops
- Metal industry
- Ship constructions
Method of use:
Shake before use or stir the product thoroughly. DINITROL 449 can be applied with light airless spray equipment or by means of an air-mix pistol with an air-pressure of 2 – 5 bar. Optimum spraying distance is about 20 – 30 cm. Depending on the application the product can be thinned with water. The product can be sprayed haze free and does not drip. Contaminated surfaces and filthy equipment can be simply cleaned in “fresh” condition with water.
In general, the product adheres very well (without special pre-treatment) on a wide range of clean, dry, dust- and grease free substrates. The product can be applied in a two layer application together with DINITROL 977. In that case, the surface can be lightly corroded or moist but loose corrosion shall be removed before application. It is always advisable to perform an adhesion test on the materials involved. For additional information please consult DINOL.
The product can be stored between – 10 °C and + 35 °C. The packaging must be protected from direct sunlight and heat. Cool and moisture free stored the product is tenable for a maximum of 1 year in the unopened original packaging.